4 Effective Tips About How to Remove Gorilla Mounting Tape

How to remove gorilla mounting tape? Is there any easy solution? There is no doubt that the ability to remove double-sided tape successfully can be a real challenge, despite the fact that it is a very useful product to have around the house. It might take a little trial and error to find the best way to remove double-sided tape because it depends on the kind of surface it is stuck to.

Obviously, it depends on the exterior it is on, yes. Hardware and home improvement stores carry products for attempting to remove tape adhesive, including some that are less harmful and safer for surfaces that are more prone to being damaged.

However, just because it’s difficult to remove the double-sided tape doesn’t mean you can’t. As I mentioned above. The four most practical and tried-and-true suggestions are listed in this guide, along with some frequently asked questions and their respective responses.

Gorilla Tape Uses

Including wood, stone, stucco, brick, metal, and vinyl, gorilla tape adheres to smooth, rough, and uneven surfaces.

Check Product Price On Amazon

1: Taking Down Double-Sided Tape from Doors and Walls

Use a Hairdryer to Remove the Obstinate, Stuck-On Tape:

For this process, you will need your hair dryer, it should be turned on in the medium or high setting and it should be plugged into the nearby power outlet. Now hold your hairdryer a few inches away, blow hot air over the tape, and keep your full attention on the corners and edges.

As a result, you will notice that the glue will start to soften. Once the hairdryer has been on for a few minutes, you need to turn it off and attempt to pry open a corner of the tape using your fingernail. Although most of the tape ought to come off, you might need to give it another try with your hairdryer.

The mixture of Water, Vinegar, and Soap:

Take 2 cups of water, 1/4 cup of vinegar, and a few drops of liquid soap must be combined in a bowl. Now you will need to use a sponge dipped in this solution to slowly and carefully scrub the stained area of your door or wall in slightly alternating directions.

Even though a significant proportion of the paint shouldn’t be removed by this gentle cleaning solution and you could perhaps start noticing some starting to fade.

Utilize a Magic Eraser to Get Rid of Any Remaining Material

The affected area should be blotted with a wet magic eraser until all traces of the residue are gone.

Although magic erasers are safe to use on doors and walls, they shouldn’t be used on glass or other highly polished surfaces due to their slight abrasiveness.

2: Double-Sided Tape Removal from Glass

Assemble Your Materials

You cannot use heat on a window if there is double-sided tape attached because there is a chance that the glass will break. Additionally, avoid using anything too abrasive or you run the risk of scratching the glass. You must use oil to dissolve the tape instead. What you’ll need is listed below:

1. Knife in butter;
2. Window cleaning solution;
3. Glass scrubber and sponge;
4. Mineral oil, Goo Gone, or other cleaning or cooking oils;
5. Using alcohol to rub.

Butter Knife:

You can remove the tape by nipping at one of the corners with your fingernail. You could also use a butter knife or a pallet knife, but be careful to avoid scratching the glass.

Window Cleaner:

On the tape, use window cleaner, but if you don’t have any window cleaner on hand, you can make your own by mixing two cups of water, one and a half cups of vinegar, and a few drops of liquid soap.

Glass Scrubber:

Buff the wet area using a sponge and tiny, circular motions. It will aid in removing some of the residues that are firmly adhered and when using a sponge with two sides, try to use the scratchy side.

Rubbing Oil:

Consider rubbing oil and glass-safe sponges for cleaning, and if the glass cleaner or vinegar solution didn’t work to remove the tape, you’ll need to saturate it with some cooking oil, like olive oil, or a cleaning oil, like Goo Gone or Goof Off. After applying the oil to the problematic area, you will need to use a sponge to remove any remaining residues.

Rubbing Alcohol:

The glass can be cleaned with rubbing alcohol; all that is required is to dunk a soft cloth in it and rub it against the glass until all tape and oil residue is removed.

3: Double-Sided Tape Removal from Other Surfaces

Blow Dryer:

Using a medium or high heat setting, turn on the hairdryer by plugging it in, aiming the nozzle at the tape, and blowing air onto it. After a few minutes, try using your fingernail to pry the tape away from the surface. This is especially effective on paper.

Rubbing Oil:

Numerous products, such as Goo Gone and Goof Off, can help remove the double-sided tape, but they can also damage plastic surfaces. Before using one of these items on plastic, take this into consideration.

Just dab some of the mixture on the tape, let it sit for a few minutes, and then peel the tape off. If that doesn’t work, attempt scratching the tape off with a rough sponge. The chemical structure of the fluid will have broken down the sticky tape.

Nail polish Remover:

It evaporates and is undetectable, just like alcohol. It may not be the best product to use on painted or plastic surfaces because it will also dissolve any finishes and paint.

Just give the tape a few minutes in acetone or nail polish remover before peeling it off. This will function best because it won’t leave stains on fabrics.

Masking Tape:

Keep a firm hold on one corner of the masking tape as you tear a piece off and press it down firmly onto the top of the double-sided tape. Pull the masking tape slowly in your direction; the double-sided tape should follow.

4: Cleanup of Sticky Waste

Use Oil for Plastic and Glass: 

Pour cooking or cleaning oil, such as Goo Gone or Goof Off, on plastic and glass instead of water. To remove all traces of the residue, oil a cotton ball and rub it over the affected area. Use a second cotton ball dipped in rubbing alcohol to scrub away any oily residue from the surface.

Acetone on Glass: 

Be careful not to use acetone on finished, painted, or plastic surfaces. Additionally, some plastics might melt and paint will be removed. To completely remove any light residue, scrub the area with cotton balls soaked in acetone. Acetone can be sprayed on the area that needs cleaning and allowed to sit for a while before being removed if there are a lot of residues.

Advantages

An all-metal magnetic knife holder can be supported by tape. The thin, inexpensive wood blocking the use of the provided screws is on the side of a cabinet. The knife holder is unlikely to fall, despite the tape’s extreme durability.

You can first secure the tape to the back of the knife holder before hanging it on the wall. These rubbery, stretchy double-sided tapes require some effort to remove the tape backing, and you almost always end up ripping off the tape’s end in the process.

To remove the backing without damaging the portion of the tape attached to the knife holder, all you need to do is leave a small amount of extra tape protruding over the edge of the knife holder. Gorilla mounting tape is easy to cut, easy to use, it sticks like cement 

Disadvantages

• When removed, it did drop to the smooth, textured wall;
• Absolutely, the paint will come off;
• Not for use in uneven shapes or outdoors;
• It cannot be used for any significant projects.

1: How to Remove Gorilla Tape from Metal Wood?

Acetone is a miracle worker when it comes to removing gorilla tape stains, notably when other solvents have failed to do so.

2: How to Remove Gorilla Tape from Metal?

Rub cooking oil or rubbing alcohol on the residue for a few minutes to remove Gorilla tape residue from the metal.

Removing Double-Sided Tape from Glass

Scrape Off the Tape.

Gently scrape the large pieces of foam and adhesive from the glass using a brand-new razor blade in the razor blade scraper. Hold the razor blade scraper at a low 15–30-degree angle.

Utilize Solvent

Apply acetone, lighter fluid, or a small amount of water displacement fluid (WD-40) to the residue. Give the solvent 30 to 60 seconds to absorb.

Glue for Scraping

While the foam and adhesive are still wet, use the razor blade to scrape off any remaining material. Place the scraps on a sheet of aluminum foil. To get rid of the last bits of foam and adhesive, use a clean cotton rag.

Clean Glass

Using an isopropyl alcohol solution and a cotton or microfiber towel, remove the solvent from the glass.

FAQ’s

Can I remove Gorilla Tape?

Ans: Yes, but despite being strong, Gorilla Mounting Tape might damage surfaces.

Is Gorilla Tape Waterproof?

Ans: There is no doubt that Gorilla tape is waterproof.

How Do I Remove the Clear Sticky Tape?

Ans: To completely soak the sticker, use a cotton ball or paper towel along with some isopropyl (rubbing) alcohol. Give the sticker at least 10 minutes after soaking it before attempting to scrape the adhesive off with a plastic scraper. After the residue has been removed, leave a shine that is streak-free by using alcohol and a microfiber cloth.

Conclusion

If you read this whole article from first to last, then there is no need to ask any professionals how to remove gorilla mounting tape? Here, I give the 4 most effective easy tips you can easily apply by yourself to remove this Gorilla sticky tape. 

Wood, stucco, plaster, brick, and metal are among the rough surfaces that Gorilla Tape is intended to adhere to. It is also two to three times thicker than standard duct tape and made with a highly concentrated rubber-based adhesive. The end result is a tape that can pierce rough surfaces and fill gaps. Before applying Gorilla Tape, make sure the surface is clear of dirt and loose debris.