Anything that is kept in higher places will never be an easy to reach. In the case of plants that are kept higher than the average height, the biggest issue we face is watering. It’s not possible to bring each plant down and water them on their soil and put them back.
This will be too hectic an activity to do over and over again. So, it’s obvious to ask yourself, how to water hard-to-reach plants? In this article, I will show you several different ways that you can opt to know how to water plants on high shelves.
How To Water Plants On High Shelves in 7 Different Ways
Keeping plants on high shelves is nothing new. People have been keeping plants on high shelves long enough to figure out different methods of watering them. There are even automatic methods of irrigation. Let’s begin.
Climb Up Using a Ladder
We’ll start with the most boring method in the world if anyone wants to know how do you water a wall mounted plant. Watering your indoor plants the hard way may not be for everyone, but acquiring a stepping stool or ladder to approach those way-up-high plants is perhaps the most efficient method. However, it takes much longer and is quite inconvenient.
Watering your plants over the sink is the greatest approach to guarantee they’ve received the right quantity of water while not flooding them and enabling them to decay. This entails physically extracting them from their difficult-to-reach location in order to provide them with sufficient water feeding.
If your plants are stored in built-in-the-wall pots, or if you have several to number, the ladder-sink approach will most likely get tiresome after three cycles. This strategy, however, will suffice for one or two difficult-to-reach plants.
If your query is How do I water my houseplants high, this is probably the method you are looking for. If you want to construct the cheapest hanging plant water bottle imaginable, you may make a DIY model for about $10. All you’ll need are the following:
- Spray bottle
- A smidgeon of aquarium tubing
- A long, thin branch, a bamboo stick, or a metal rod
- Heat shrink tubing (one 1/4″, one 1/2″, and one 3/4″)
- Hot air gun
If you have everything at hand, let’s proceed with the making – To begin, remove the nozzle from the plastic spray container. Put the nozzle cap into the 3/4″ heat shrink tube and shrink it with the hot air gun for a close fit.
Place the 12″ shrink tubing over the heat-treated part to more firmly connect the nozzle cap into the tube. Then blow hot air on this area. Using the 1/4″ shrink tubing, slip it over the previously shrunk tube piece, repeating the heat treatment until it’s tight.
Then, secure the aquarium tube to the bottom of a long branch, bamboo pole, or metal rod.
You may use a rubber band to connect these two things. All that remains is to fill the water bottle, place the tubing above the bottle, and let the water run through the tube and up to the plant!
Bottom watering, even with a spray, can be used to reach hard-to-reach shelves. Bottom-watering may also be used by placing plastic trays under your plants and you can just water the trays instead of pouring water on the soil or plant.
This approach permits water to sink into the plant rather than readily draining via the root system. However, you should bring the plant down once in a while to look for pests and water it from the top to assist eliminate excess salts from the soil.
The type of container in which your plants are housed might influence how frequently they require watering. Plants may be put in plastic containers rather than terracotta pots to assist preserve moisture for your plants.
Terracotta pots typically dry out your plants. Terracotta is a form of earthenware that dries quickly, making it ideal for plants that like well-draining soil, such as succulents and cacti. However, for most species, a glazed or plastic container will allow you to go a few days longer without watering.
Many plants do not require soil to grow. There are other soil-free options, like hydroponics or water propagation, that can benefit plants in difficult-to-reach areas. These approaches need minimal upkeep and do not necessitate frequent irrigation.
However, you will need to replace or add water on a frequent basis, but this is a fantastic approach for difficult to reach locations.
A garden sprayer is a piece of extremely useful equipment for administering insecticides or fertilizers in the greenhouse or outdoor crops. It is, nonetheless, useful for indoor plants. In the store, we find that a sprayer is useful for managing watering for several plants instead of using a regular watering can that may be filled multiple times.
The sprayer has a longer nozzle that expands your reach and allows you to reach higher shelves. Make sure you obtain a sprayer that is specifically designed for houseplants and not one that has previously been used for outside pesticides.
You would not want to murder your plant-y companions by mistake. Garden sprayers are widely accessible in major hardware shops’ garden and outdoor areas, as well as online.
In many marketplaces, you can buy an automatic watering system based on drip irrigation tactics. They are not that expensive. They hardly require probably double A batteries to function.
The best part is that these types of systems are capable of saving at least 60% of water. Overwatering or underwatering can cause plants to die, but not with an automatic watering system being around.
I believe I have covered everything that you have to know about how to water plants on high shelves. I also added a few extra methods that will help you water hanging plants or wall mounted plants.
According to the suggestions I made, see which method suits you the best and opt for it. I will suggest not to use the first one. It’s really hectic.